Make page headers sticky with subtle shadow on scroll. Fix min-height to 90px to prevent jumping when switching tabs. Modernize layout to use full viewport height.
Convert admin components from Svelte 4 to Svelte 5 syntax using $props, $state, $derived, and $bindable runes. Simplifies AdminNavBar logic and improves type safety.
Extract BrandingToggle and BrandingSection components. Consolidate $effect blocks, add $derived state, and apply BEM naming. Reduces component size by 47% while improving maintainability.
Add live preview to branding form showing featured image, background color, and logo. Add database fields and toggles to control visibility of each element in project headers.
Add return false to drop handler so ProseMirror's Dropcursor extension can handle the actual node movement. Previously the handler would intercept drops but not perform any movement.
Extract reusable form patterns following Svelte 5 best practices:
**New Store Factory** (`project-form.svelte.ts`)
- Centralizes form state management with `$state` and `$derived` runes
- Provides validation, payload building, and field mutation methods
- Type-safe with ProjectFormData interface
- Reusable across different contexts
**New Helpers**
- `useDraftRecovery.svelte.ts`: Generic draft restoration with auto-detection
- `useFormGuards.svelte.ts`: Navigation guards, beforeunload warning, Cmd+S shortcut
- `DraftPrompt.svelte`: Extracted UI component for draft recovery prompts
**Refactored ProjectForm.svelte**
- Reduced from 720 lines to 417 lines (42% reduction)
- Uses new composable helpers instead of inline logic
- Cleaner separation between UI orchestration and business logic
- All form state now managed through formStore
- Draft recovery, navigation guards fully extracted
**Benefits**
- Reusable patterns for PostForm, EssayForm, etc.
- Easier to test helpers in isolation
- Consistent UX across all admin forms
- Better maintainability and code organization
Closes Task 3 of admin modernization plan (Phase 2)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Fix a race condition where the clickOutside action's update() method
would remove and re-add the event listener every time it was called,
even when the enabled state hadn't changed. This caused clicks to be
missed during the setTimeout delay.
Changes:
- Track previous enabled state before updating
- Only use setTimeout when transitioning from disabled to enabled
- Immediately re-add listener when enabled state stays true
- No listener changes when enabled state stays false
This ensures click-outside events are consistently detected without
gaps in event listener registration.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Replace manual click event listener with clickOutside action for the
pane backdrop click handling. This simplifies the code and ensures
consistent click-outside behavior.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Replace manual click event listener with clickOutside action for the
publish menu dropdown. This simplifies the code and ensures consistent
click-outside behavior across all admin dropdowns.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Updated components to use the new clickOutside action instead of manual
event listener management:
- ProjectListItem: Add clickOutside action and dropdown coordination
- AdminSegmentedController: Replace $effect with clickOutside action
- BubbleTextStyleMenu: Simplify click-outside handling
- BubbleColorPicker: Simplify click-outside handling
- Posts/Projects pages: Remove redundant page-level click handlers
The clickOutside action provides a cleaner, more maintainable way to
handle click-outside behavior with proper lifecycle management.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Created a reusable clickOutside Svelte action that dispatches a custom
event when users click outside an element. This replaces manual
document.addEventListener patterns.
Features:
- TypeScript support with generic event types
- Configurable enabled/disabled state
- Optional callback parameter
- Proper cleanup on destroy
- setTimeout to avoid immediate triggering
Updated components to use the new action:
- BaseDropdown.svelte: Removed $effect with manual listeners
- PostDropdown.svelte: Replaced manual click handling
Part of Task 5 - Click-Outside Primitives
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Fixed infinite loop caused by calling goto() inside beforeNavigate,
which would trigger the same navigation guard again.
The correct approach is to NOT cancel navigation, but simply await
the autosave flush. SvelteKit's beforeNavigate accepts async callbacks,
so navigation will naturally wait for the flush to complete before
proceeding.
Changes:
- Removed navigation.cancel() calls
- Removed goto() calls that created the loop
- Simply await autoSave.flush() and let navigation proceed
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Fixed navigation guards in all forms that were calling the non-existent
navigation.retry() method. After canceling navigation and flushing autosave,
now properly uses goto() to navigate to the intended destination.
Files fixed:
- ProjectForm.svelte
- EssayForm.svelte
- PhotoPostForm.svelte
- SimplePostForm.svelte
- posts/[id]/edit/+page.svelte
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Added runes-based autosave functionality to SimplePostForm:
- Added autosave store with updatedAt conflict detection
- Smart navigation guards and beforeunload warnings
- Draft recovery banner instead of inline prompt
- Only saves to localStorage on autosave failure
- Added AutoSaveStatus component
- Fixed $derived syntax to use $derived.by()
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Added runes-based autosave functionality to PhotoPostForm following the same pattern as EssayForm:
- Added autosave store with updatedAt conflict detection
- Smart navigation guards and beforeunload warnings
- Draft recovery banner instead of inline prompt
- Only saves to localStorage on autosave failure
- Added AutoSaveStatus component
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add createAutoSaveStore for edit mode
- Add updatedAt tracking for conflict detection
- Add hasLoaded flag to prevent autosave on initial load
- Prime autosave after initial data loads
- Add AutoSaveStatus indicator in header
- Move draft recovery from inline to prominent banner
- Only save draft on autosave failure (not every change)
- Smart navigation guard (only blocks if unsaved)
- Add beforeunload warning (only if unsaved changes)
- Add keyboard shortcut (Cmd/Ctrl+S)
- Add proper cleanup on unmount
- Update clearDraft calls in restore/dismiss functions
- Fix $derived syntax (use $derived.by for draftTimeText)
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Update beforeNavigate guard to check autosave status before blocking
- Allow instant navigation when status is 'saved' (no interruption)
- Add beforeunload warning for browser close/reload
- Only show warnings when status is NOT 'saved' (saving/error/idle)
- Improves UX by not interrupting users when everything is already saved
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Remove redundant localStorage saves on every form change
- Only save draft when autosave status is 'error' or 'offline'
- Reduces draft recovery banner noise for successful autosaves
- Navigation guard still prevents data loss when navigating away
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Update ProjectForm to use new createAutoSaveStore with Svelte 5 runes
- Fix $derived syntax in AutoSaveStatus (use $derived.by for multi-statement)
- Add hasLoaded flag to prevent infinite loop on autosave completion
- Move draft recovery from inline header to prominent banner below header
- Style draft banner with blue info colors and slide-down animation
- Fix draft persistence by clearing localStorage on restore/dismiss
- Call beforeNavigate at top level for proper Svelte 5 lifecycle
- Add keyboard shortcut (Cmd/Ctrl+S) and navigation guard effects
- Update AutoSaveStatus to support both old stores and new reactive props
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Introduces createAutoSaveStore() using $state() for automatic reactivity.
New store provides cleaner API while maintaining backward compatibility.
Changes:
- New: src/lib/admin/autoSave.svelte.ts with createAutoSaveStore()
- Uses $state() for status and lastError (reactive getters)
- Export AutoSaveStore and AutoSaveStoreOptions types
- Add JSDoc with usage examples
- Update autoSaveLifecycle.ts to accept both old and new types
- Export AutoSaveController type from old file for compatibility
Old createAutoSaveController() remains unchanged for gradual migration.
Type checking passes with no new errors.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Enhances autosave controller with missing features:
- prime(payload): Sets initial hash baseline to prevent autosaves on page load
- idleResetMs option: Auto-transitions from 'saved' → 'idle' status (default 2s)
- onSaved callback: Now receives { prime } helper for re-priming after server response
- Cleanup: destroy() now properly clears idle reset timer
All existing tests pass. Backward compatible - forms not using new features yet.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
Introduces createListFilters() with type-safe, reactive filtering and sorting
for admin list pages. Eliminates ~120 lines of duplicate code across projects
and posts pages.
🤖 Generated with [Claude Code](https://claude.com/claude-code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add video player with controls in MediaDetailsModal
- Display video metadata (duration, codecs, bitrate) in metadata panel
- Show video thumbnails with play icon overlay in MediaGrid
- Support video preview in upload components
- Replace emoji icons with SVG play icon
- Maintain natural video aspect ratio in all views
- Add proper styling for video thumbnails and placeholders
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
- Add video MIME types support (WebM, MP4, OGG, MOV, AVI)
- Increase upload size limit to 100MB for videos
- Add ffmpeg integration for local video processing
- Generate video thumbnails at 50% duration
- Extract video metadata (duration, codecs, bitrate)
- Add database fields for video metadata
- Support video uploads in both local and Cloudinary storage
- Maintain aspect ratio for video thumbnails (1920px max width)
🤖 Generated with [Claude Code](https://claude.ai/code)
Co-Authored-By: Claude <noreply@anthropic.com>
